Compuprint 4247-L03 - Manual (Page 34)

COVER OPEN
CLOSE COVER When the printer cover is not closed correctly, the buzzer
sounds and the display shows alternately these two messages.
Close the printer cover.
EJECTING The printer is ejecting the paper out of the printer.
INITIALIZING LAN This message is displayed when the LAN is reset (only if the
LAN interface board is installed).
LOAD FRONT1
LOAD FRONT2 These messages are displayed when the corresponding paper
path is out of paper. The printer displays only the messages
related to the installed devices.
LOCKED MENU When the access to the Printer Setups has been locked at the
power on, the printer displays this message.
MACRO CHANGING The macro has been changed and the printer is updating the
settings.
MICRO FEED DOWN The paper is fed in microsteps downwards when pressing the
arrow key.
MICRO FEED UP The paper is fed in microsteps forwards when pressing the
arrow key.
OPER. INTERRUPTED This message is displayed if the ALTERNATE key has been
pressed to interrupt a park procedure.
PARKING The printer is parking the fanfold paper.
PATH CHANGING The path has been changed and the printer is updating the
settings.
PRESS A KEY
NVM CHANGED The NVM has been changed. Press any key to set the printer.
RELEASE KEY This message is displayed when you can release the
PROGRAM key in the Selftest selection or in the Power-on
Configuration procedure.
REMOTE CONTROL This message is displayed when the printer operates from
remote control (only if the LAN interface board is installed).
RESET & BREAK The printer received a reset and break command via interface.
SELF TEST Printing the self-test page.
TEAR IF NECESS.
EJECT PAPER These messages are displayed when the printer receives a paper
parking command and the TEAR NO item is selected for the
tear-off function. Tear off the fanfold then press the PARK key
to eject the paper.
TEAR IF NECESS.
PARK PAPER These messages are displayed when the printer receives a paper
parking command. Tear off the fanfold paper if necessary and
then press the PARK key to park the paper.
TEAR OFF PAPER
EJECT PAPER These messages are displayed when the printer receives a paper
ejecting command (TEAR NO item has been selected for the
tear-off function) but was not able to execute it, because the
paper to be ejected is longer than 18 inch. Tear off the fanfold
paper and then press the PARK key to eject the paper.
TEAR OFF PAPER
PARK PAPER These messages are displayed when the printer has received a
paper parking command but was not able to execute it, because
the paper to be parked is longer than 18 inch. Tear off the
fanfold paper and then press the PARK key to park the paper.
UNLOCKED MENU When the access to the Printer Setups has been unlocked at the
power on, the printer displays this message.
22 User's Guide