Dataprobe iBoot-G2 Cloud Service Setup Guide User Manual
Iboot cloud beta, General description, 5 step process
Advertising
General Description
This document details the procedures necessary to get an iBoot-G2 or iBoot-G2+ onto the Beta test
server of Dataprobe’s iBoot Cloud Service.
General Requirements:
iBoot-G2 or -G2+ with Administrator rights access
iBoot Cloud Compatible Firmware. Located On the Dataprobe Forum
Windows PC located on the same subnet as the iBoot unit
5 Step Process
1. Establish Account with iBoot Cloud Server
2. Upgrade iBoot to Cloud compatible firmware
3. Enable Cloud Services on iBoot
4. Register iBoot with Cloud Account
5. Control Power from the Cloud
iBoot Cloud Beta
Setup Guide
Advertising
This manual is related to the following products: