Exit, sealing and inserting area, En glish – Formax 6404 Series User Manual
Page 104
Advertising
Exit, Sealing and Inserting Area
When a stoppage occurs in this area, remove the material as follows:
1.
Open the side cover
F.
2.
Lift the locking lever of the loc and pull the loc up into the vertical position.
3.
Remove all material.
4.
Close the side cover.
5.
Lower the loc and the inserter cover.
6.
Press the
[Reset] button to reset the error and restart the job.
10
En
glish
97
| Page 97 | jan-06-2012 13:58 |
Advertising
See also other documents in the category Formax Office Equipment:
- FD 1500 Plus
- FD 1500 Plus
- FD 1500 Plus
- FD 1500 Plus
- FD 1500 Plus
- FD 1202
- FD 1202
- FD 2030 Quick Setup Guide & Test Sheet
- FD 2030 Quick Setup Guide & Test Sheet
- FD 2030 Quick Setup Guide & Test Sheet
- FD 2030 Quick Setup Guide & Test Sheet
- FD 1502 Plus
- FD 2052 Operator Manual, 4th Edition
- FE 2032
- FD 2000IL System
- FD 2052 Quick Setup Guide & Test Sheet
- FD 2052IL System
- FD 382 / FD 38X
- FD 382 / FD 38X
- FD 2082
- FD 6100
- FD 2084
- 2200 Series
- FD 6102
- 6202 Series
- 6200 (600) Series
- 6302 Series
- 6304 Series
- 6402 Series
- 6600 Series
- 6206 Series
- 6204 Series
- 6900 Series
- 7100 Series
- 6606 Series
- FD 314
- FD 314
- FD 305
- FD 312
- FD 320
- FD 332
- 7102/7102XT Series
- 7200 Series
- FD 372
- FD 340
- FD 380
- FD 342
- FD 3200
- FD 120
- FD 125
- FD 4170
- FD 4400
- FD 540
- FD 670
- Cut-True 13M
- Cut-True 16M
- Cut-True 16M
- Cut-True 22S
- FD 210M
- Cut-True 27S
- FD 215S
- FD 230
- FD 260-10
- FD 260
- FD 260-20
- Cut-True 27A
- FD 280
- FD 280-10
- FD 130
- FD 452
- FD 280-20
- 402 Series
- 402 Series, Rev. 2
- FD 150
- FD 402A1 Operator Manual
- FD 402TA1
- FD 160
- FD 404A1 Operator / Parts Manual
- V-STACK36
- Roller Cleaning Kit Instructions
- FD 180
- FD 4060