Formax 6404 Series - Manual (Page 50)

3. Enter the pin code 2546.
The job settings menu opens. See Job settings on page 46 for the meaning of all
buttons and settings.
4. Press [Save] to save the job with the entered settings under the specified job number
and name.
5. Press the [1x] button to verify that the insert position and address position are correct
(see Verifying the Insert Position on page 37 and Adjusting the address position on
page 35).
Copying a job
To copy existing job settings to a new job:
1.
Press the [Supervisor] menu button from the main menu.
2. Enter the pin code 2546.
5
En
glish
43
| Page 43 | jan-06-2012 13:58 |