IDK MSD-54 Series Command Guide - Manual (Page 105)

MSD-54 Series Users Guide (Command Guide)
105
@STG Set toggle operation
Command
format @STG, event_1, toggle_1 (, event_2, toggle_2･･･)
Return value
format @STG, event_1, toggle_1 (, event_2, toggle_2･･･)
Parameter event_1-9 : Command execution condition
0 = All commands, 1 = COMMAND A to 9 = COMMAND I
toggle_1-9 : Toggle
0 = Toggle OFF, 1 = Toggle ON
Example Send
Receive
@STG,1,1
@STG,1,1 Toggle ON for COMMAND A.
Terminated normally.
Related info. 8.12.3 Command link
@GTG Get toggle operation
Command
format @GTG, event_1 (, event_2･･･)
Return value
format @GTG, event_1, toggle_1 (,event_2, toggle_2･･･)
Parameter event_1-9 : Command execution condition
1 = COMMAND A to 9 = COMMAND I
toggle_1-9 : Toggle
0 = Toggle OFF, 1 = Toggle ON
Example Send
Receive
@GTG,1
@GTG,1,1
Get toggle of COMMAND A.
COMMAND A: Toggle ON
Related info. 8.12.3 Command link
@SUP Set execution plane at starting up
Command
format @SUP, event_1, plane_1 (, event_2, plane_2･･･)
Return value
format @SUP, event_1, plane_1 (, event_2, plane_2･･･)
Parameter event_1-9 : Command execution condition
0 = All commands, 1 = COMMAND A to 9 = COMMAND I
plane_1-9 : Execution plane at start-up
0 = AUTO, 1 = PLANE A, 2 = PLANE B
Example Send
Receive
@SUP,1,1
@SUP,1,1 COMMAND A executes PLANE A at start-up.
Terminated normally.
Related info. 8.12.3 Command link