Marantz M-CR610 - Manual (Page 70)

70
Appendix Tips Settings Connections Contents
Front panel Rear panel Index Remote
Playback
n Network connection settings
Q0 Various items will be displayed if you selected “Wi-Fi” in
Example 1. Select or input items as necessary, and then click
“Test Connection” to apply the changes.
• Items displayed may vary depending on selected items and
connection status.
• After selecting each item, wait a moment for the display to
be updated.
Q1 Displayed if “DHCP” or “Proxy” is selected in Example 1.
When changing DHCP/proxy settings, input or select for each
item.
%
• To apply network connection settings, click “Test Connection” after
making changes.
2 Update on web screen
Firmware can be updated using the “Web control function”
(vpage 67).
“Web control function” (vpage 67) settings must be completed in
advance on a PC belonging to the same network.
For information on obtaining update files, please contact our customer
service center.
1 Click r from step 5 for the “Web control function”
(vpage 67).
The PC will display the following screen.
Wait for approximately 1 minute.
You can also gain access by entering the IP address shown by the
unit into a web browser.
Please wait...
FIRMWARE
Now,go to the new IP displayed in the body.
If do not move the page within 1 minute,please refer to IP.
GThe web displayH
GThe unit’s displayH