Marantz M-CR610 - Manual (Page 85)

85
Appendix Tips Playback Connections Contents
Front panel Rear panel Index Remote
Settings
Firmware
Set whether or not to check for firmware update, update the firmware,
and display update, upgrade and alert notifications.
2 Update
Update the firmware of Marantz CD Receiver.
Check for Update : Check for firmware updates. You can also check
approximately how long it will take to complete
an update.
Update Start : Execute the update process.
%
• If updating fails, the set automatically retries, but if updating is still not
possible, one of the messages shown below is displayed. If the display reads
as shown below, check the settings and network environment, then update
again.
2 Notifications
Notification messages are displayed in the screen when the power is
switched on when new firmware can be used, or when there are other
notification messages.
Update
On (Default) : Display update message.
Off : Do not display update message.
Upgrade
On (Default) : Display upgrade message.
Off : Do not display upgrade message.
Notification Alerts
On (Default) : Displays notification messages from Marantz in the
popup menu.
Off : Does not display notification messages from Marantz in the popup
menu.