Marantz M-CR610 - Manual (Page 84)

84
Appendix Tips Playback Connections Contents
Front panel Rear panel Index Remote
Settings
2 Volume Offset
With the output of Speaker A fixed, the audio level of Speaker B can be
adjusted within the range –6 dB to +6 dB.
%
• When using this setting, also set “Bi-Amp” in the menu to “Disable”
(vpage 83).
–6dB – +6dB (Default : 0dB)
Language
Set the language for display on the menu.
English (Default) / Deutsch / Français / Italiano / Nederlands / Español
/ Svenska / / Polski
Auto-Standby
When this unit is in the stop state and there is no input signal and operation
for 15 minutes, it automatically enters the standby mode.
For the input source “Analog In 1”, “Analog In 2”,“Tuner” and “Direct
iPod” only, when no operation is performed for eight hours, this unit
automatically enters the standby mode.
On (Default) : The unit goes into standby after 15 minutes.
Off : The unit does not go into standby automatically.