Measurement Computing DaqBoard 1000 Series - Manual (Page 47)

Connections and Pinouts, DaqBoard/1000 Series 2
Overview …… 2-1
TB-100 Terminal Connector Option …… 2-2
Pinout for DaqBoard/1000 and DaqBoard/1005 …… 2-3
CAUTION
Turn off power to all devices connected to the system before connecting cables or
setting configuration jumpers and switches. Electrical shock or damage to
equipment can result even under low-voltage conditions.
CAUTION
The discharge of static electricity can damage some electronic components.
Semiconductor devices are especially susceptible to ESD damage. You should
always handle components carefully, and you should never touch connector pins or
circuit components unless you are following ESD guidelines in an appropriate ESD
controlled area. Such guidelines include the use of properly grounded mats and
wrist straps, ESD bags and cartons, and related procedures.
Overview
DaqBoard/1000 Series boards communicate [external from the host PC] through a 68-pin SCSI III
connector. The TB-100 board is used to provide convenient screw-terminal connections for all signal I/O.
Pinouts for both the TB-100 and the DaqBoard/1000 Series boards follow.
Note that a TB-100 board can be easily connected to a DaqBopard/1000 or DaqBoard/1005 via a 68-
conductor, shielded cable, p/n CA-G56. The cable has a length of three feet.
DaqBoard/1000 and /2000 Series User’s Manual 889094 Connections & Pinouts, DaqBoard/1000 Series 2-1