Measurement Computing ZonicBook 618E rev.3.4 - Manual (Page 43)

ZonicBook/618E User’s Manual
947091 System Setup and Power Options 5-9
Configure the Computer’s TCP/IP settings as follows.
Internet Protocol (TCP/IP) Properties
6. Select the “Use the following IP Address” radio button.
7. Set the IP address field to 10.0.0.x where x is some number from 1 to 254.
Make sure that each computer on the dedicated network has a unique IP address.
8. Set the Subnet mask to 255.0.0.0. Note that the remaining fields can be left unchanged.