MovinCool Climate Pro 18 Service Manual - Manual (Page 13)

Operation Section
13
Technical Specifications - Table 2
ITEM SPECIFICATIONS
Ventilation Equipment for
Indoor Coil Type of Indoor Coil (Heat Exchanger) Plate Fin
Type of Fan Centrifugal Fan
Air Flow High 540 CFM (918 m 3 /h)
Medium 440 CFM (748 m 3 /h)
Low 350 CFM (595 m 3 /h)
Max. External Static Pressure 0.31 IWG (77 Pa)
Motor Output High 0.12 kW
Medium 0.045 kW
Low 0.017 kW
Power Cord NEMA Plug Configuration 5-20
Gage x Length 12 AWG (3-core) x 10 ft (3.0 m)
Refrigerant Refrigerant Control Electronic Expansion Valve
Type R-410A
Amount 1.94 lb (0.88 kg)
Signal Connection Fire Alarm Input 1 (FA-1, FA-2) • No-voltage contact input
• Contact resistance less than 100
ohm
Fire Alarm Input 2 (Al-1, Al-2)
Warning Signal Output (OS-1, OS-2) 2 A at 30 V (DC/AC) max. with resis-
tive load
External Wall Thermostat Millivolt Type With terminals RC, O/B, G, Y
24VAC Type With terminals C, O/B, G, Y,
24VAC RC/RH
Dimension W x D x H 21 x 27 x 50 in
(533 x 686 x 1,270 mm)
Weight Net 214 lb (97 kg)
Shipping 250 lb (113 kg)
Drain Tank Capacity 5.0 gal (19 L)
Cooling Operating Condition
Range Inlet Air Temperature Max. 95 °F (35 °C), 60 %RH
Min. 65 °F (18 °C), 50 %RH
Heating Operating Condition
Range Without Outdoor Heat
Exchanger Duct Max. 80 °F (26.7 °C), 50 %RH
Min. 40 °F (4.4 °C), 50 %RH
With Outdoor Heat
Exchanger Duct Max. 80 °F (26.7 °C), 50 %RH
Min. Indoor Heat Exchanger:
40 °F (4.4 °C), 50 %RH
Outdoor Heat Exchanger:
24 °F (-4.4 °C), 50 %RH