VXL Instruments Itona TC75yyd Series - Manual (Page 12)

Replacing the Motherboard 8
6
Replacing the Motherboard
1. Remove the power cord and side cover as described on page 4.
2. Unplug the cables and connectors as shown in Figure 6-1.
Note:

While replacing the motherboard, ensure that you connect the cables into the same
ports from which you removed them.

COM 3 port is concealed using glue. COM 1 and COM 2 are brought out through
the rear I/O panel.
Figure 6-1: Cables and Connectors
COM 3
Concealed
COM 2 COM 1