Watson-Marlow Bredel 265 - Manual (Page 22)

INSTALLATION
22
5 INSTALLATION
5.1 Unpacking
When unpacking, carefully follow the instructions as
given on the packaging or on the hose pump. This also
applies to the unpacking of the geabox and the electric
motor.
5.2 Inspection
Check that your delivery is correct and check it for any
transport damage. Also when replacing parts, check
that the delivery of the replacement parts is correct and
check them for any transport damage. Refer to §
4.1.1 .
Report any damage immediately to your Bredel
representative.
5.3 Installation conditions
5.3.1 Ambient conditions
Temperature
Make sure that the hose pump is in an area where the
ambient temperature during operation is not lower than
-20 °C and not higher than +45 °C.
The minimum start-up temperature for the gearbox
is -10 °C. A heater is required for tempertures below
-10 °C.
Atmospheric humidity
When the unit must be stored for a long period of time,
especially in humid conditions, fill the gearbox
completely with oil and protect the machined parts with
rust inhibitors.
For extreme conditions, special precautions must be
taken. Contact your local Watson-Marlow
Bredel representative for additional information.