Watson-Marlow SPS - Manual

MasoSine SPS sinusoidal pumps User Manual 1
MASOSINE PROCESS PUMPS MANUALS
MasoSine Process Pumps
SPS sinusoidal pumps
m-maso-sps-gb-04
Contents
1 Declaration of conformity 2
2 Declaration of incorporation 2
3 Warranty and liability 3
4 When you unpack your pump 4
5 Information for returning pumps 5
6 Sinusoidal pumps—an overview 5
7 Safety notes 6
7.1 Obligation of the operating
organisation 6
7.2 Organisational measures 6
7.3 Obligation of the operators 7
7.4 Personnel training 7
7.5 Safety measures 7
7.6 Dangers when handling the
machine 7
7.7 Safety measures in normal
operation 8
7.8 Protective devices 8
7.9 Dangers due to hazardous
pumped material 8
7.10 Dangers due to electrical
energy 8
7.11 Dangers due to hydraulic
energy 9
7.12 Special danger points 9
7.13 Constructional changes to
the machine 9
7.14 Noise 9
7.15 Limit values for the pump 10
7.16 Maintenance and repair 10
7.17 Cleaning the pump 12
7.18 Faults 12
7.19 Use as intended 13
8 Safety notes (ATEX) 13
8.1 Safety signs 13
8.2 Earthing the pump 14
8.3 Material properties 14
8.4 Pressure conditions 14
8.5 Maintenance and repair 14
8.6 Cleaning the pump 15
8.7 Medium to be pumped 15
8.8 Coupling 15
8.9 Drive 15
9 Pump specifications 15
9.1 Dimensions (in millimetres) 16
10 Transport 22
11 Installation 22
12 Connection to the piping 23
12.1 Cavitation 24
13 Possible pump orientations 25
13.1 Changing pump orientation 25
13.2 Changing rotation direction 26
14 Connecting this product
to a power supply 27
15 Start-up and operation 27
16 Flushing the seal system 28
16.1 Static flushing device 28
17 Cleaning and sterilisation 29
18 Heating and cooling option 31
19 Oil change 32
20 Troubleshooting 33
21 SPS 200, SPS 300 and SPS 400:
Adjusting the shaft 35
21.1 Adjusting dimension X in
models with cast power
frame 35
21.2 Adjusting dimension X
in models with stainless
steel power frame 37
22 Dismantling and assembly 39
22.1 Dismantling all models 39
22.2 Dismantling and
assembling the SPS 100 39
22.2.1 Dismantling the SPS 100 39
22.2.2 Assembling the SPS 100 47
22.3 Dismantling and assembling
the SPS 200 53
22.3.1 Dismantling the SPS 200 53
22.3.2 Assembling the SPS 200 66
22.4 Dismantling and assembling
the SPS 250, SPS 300,
SPS 400 and SPS 500 79
22.4.1 Dismantling the SPS 300
and SPS 400 79
22.4.2 Assembling the SPS 250,
SPS 300, SPS 400 and SPS 500 88
23 The static flushing device 96
24 Tightening torques 102
25 Parts lists 104
25.1 Pumps 105
25.2 Seals 123
25.3 Front support versions 133
25.4 The flushing ring for tubing 138
25.5 The static flushing device 139
26 Decontamination certificate 142
27 Trademarks 143
28 Publication history 143