Welltech WG2504 FXS V.4.02 - Manual (Page 23)

23
2-8 SNMP
Figure 2-8 SNMP
SNMP Agent:
 SNMP Agent: Enable SNMP or not.
 Read Only Community Name: The community name to read
through SNMP protocol
 Read Write Community Name: The community name to read and
write through SNMP protocol.
 SNMP Agent Access on WAN: Enable SNMP to be accessed
through WAN port or not.
Trusted Peer:
 Type:
 Any Address: Any address can retrieve the SNMP
information.
 Specify an IP Address: Only the IP address listed can
retrieve the SNMP information. Normally, it will be the SNMP
manger IP address.
 Specify a Subnet: Only the network specified can retrieve
the SNMP information.
 IP address: The IP address for a trusted peer
 Subnet Mask: The network mask for a trusted peer
SNMP Trap:
 SNMP Trap: Enable SNMP trap or not
 Destination: The IP address for SNMP manager to receive the SNMP
trap
 Community: The communicate name for sending the SNMP trap