Welltech WG2504 FXS V.4.02 - Manual (Page 48)

48
7-1 FXS line
Figure 7-1 FXS setting
 User ID: FXS Line number (TEL1 to TEL4)
 User Type: The line type, FXO or FXS
 Line State: Set to active if you would like to use this line. Otherwise,
set to Inactive.
 Forward reason:
 Unconditional forward: forward the call all the time
 Busy forward: Forward the call when phone is busy.
 No answer forward: forward the call when the call does not
answered after no answer timeout.
 Forward TEL: The forward telephone number for the selected
reason
 No answer timeout: sec The no answer timeout will be used (default
is 120 sec)
 Call waiting: Enable call waiting or not. When disable call waiting
features, the second incoming call will be rejected.
 Reject Anonymous Call: Reject the anonymous incoming call or not
 Hot line: Enable to disable hot line feature
 Hot line TEL: The number to be dialed automatically after the user
pickup the phone.