H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 54)

4-26
Volume Module Command WX3024 WX3010 WX3008
hot-backup hellointerval No No No
wlan ap-group
group-id ranges from 1 to
64. group-id ranges from 1 to
12. group-id ranges from 1 to
12.
wlan permit-ap-group
group-id ranges from 1 to
64. group-id ranges from 1 to
12. group-id ranges from 1 to
12.
display wlan client
member ipv6
ipv6-address not
supported member ipv6
ipv6-address not
supported member ipv6
ipv6-address not
supported
display wlan mobility-group
member ipv6
ipv6-address not
supported member ipv6
ipv6-address not
supported member ipv6
ipv6-address not
supported
member
member ipv6
ipv6-address not
supported member ipv6
ipv6-address not
supported member ipv6
ipv6-address not
supported
mobility-tunnel iactp6 not supported iactp6 not supported iactp6 not supported
undo member
undo member ipv6
ipv6-address not
supported undo member ipv6
ipv6-address not
supported undo member ipv6
/ipv6-address not
supported
WLAN roaming
commands
source
ipv6 ipv6-address not
supported ipv6 ipv6-address not
supported ipv6 ipv6-address not
supported
duplex No No No
display loopback-detection No No No
flow-control No No No
jumboframe enable
value ranges from 1600 to
4086 bytes and defaults to
1600 bytes. value ranges from 1600 to
9216 bytes and defaults to
1600 bytes. value ranges from 1600 to
9216 bytes and defaults to
1600 bytes.
loopback Only internal is supported Only internal is supported Only internal is supported
loopback-detection control
enable
No No No
Layer 2 – LAN
Switching Command
Reference Ethernet interface
commands
loopback-detection enable No No No