Grass Valley SCRIPT Viewer News Rev.A - Manual (Page 17)

TM Page 15
Connecting the SCRIPT Viewer System
© 1999 ParkerVision, Inc. • Install Your SCRIPT Viewer™
Connecting the Keyboard and Mouse
1. Insert the mouse cable into Connector Πon the CPU back panel.
2. Insert the keyboard cable into Connector  on the CPU back panel.
You can control a script with a SCRIPT Viewer keypad or with the computer
keyboard. The keypad can control the SCRIPT Viewer through RF or it can be
attached to the camera (see page 16).
Connecting the Monitor
1. If not already attached, insert the power cables into the monitor’s power inlet. Plug the
other end into a grounded power outlet.
2. Attach the VGA cable to the Video (VGA) Connector Ž on the CPU back panel. Insert
the other end into the VGA Input on the back of the monitor.
Œ

Ž