Grass Valley LDK 4488 User Manual

Page 25

Advertising
background image

LDK 4488, LDK 4489 SuperXpander, Xpander User’s Guide (v5.0)

25

Chapter 3 - Assembly

8.

Push the camera all the way forward along the wedge-shaped groove until the rear stud
engages the rear of the camera. When he camera is correctly locked into position lever A
springs out.

9.

Adjust the position of the camera with levers C and D so that the bayonet ring engages
the lens.

10. Use the supplied lens fixing tool to turn the bayonet ring lever on the front of the camera

downwards so that the camera is connected to the lens. The adjustment pin on the
bayonet ring fits into the hole of the fixing tool.

11.

Tighten the levers C and D to secure the camera.

12. Plug the flying Triax lead from the left side panel of the SuperXpander/Xpander into the

rear of the camera.

13. Connect the Triax cable from the Triaxbase station to the connector on the left side of the

SuperXpander/Xpander.

rear stud

Quick Mount plate

wedge-shaped groove

hole

LENS FIXING TOOL

Advertising
This manual is related to the following products:
See also other documents in the category Grass Valley Equipment: