HEIDENHAIN ND 720 v.3 - Manual (Page 56)

56
Output Structure of Parameter Lists
Line 1
Each parameter output starts with the starting character < * > ( HEX: 0x2A)
* <CR> <LF>
3 characters
Line 2
Output of model designation
N D - 7 6 0 <CR> <LF>
13 characters
2 characters
Type of display unit End
Subsequent lines for the individual parameters:
a: Parameters:
The parameter setting can be edited by pressing the minus key (e.g. positive counting direction / negative counting direction,
etc.)
Examples:
P 0 1 I N C H = 1 <CR> <LF>
6 characters
13 characters 3 ch. 6 characters 2 characters
P 3 1 . 1 D P P O S . 5 = 5 <CR> <LF>
6 characters 13 characters 3 ch. 6 characters 2 characters
Parameter designation Parameter in plain language Sep.block Parameter value End
Left-aligned Right-aligned Right-aligned
Output
Structure
of
Parameter
Lists
Bateil2.pm6 27.03.2002, 12:09 56