HEIDENHAIN TNC 310 (286 140) - Manual (Page 49)

37 HEIDENHAIN TNC 310
Programming tool movements in conversational
format
To program a block, initiate the dialog by pressing a soft key. In the
screen headline, the TNC then asks you for all the information
necessary to program the desired function.
Example of a dialog
Initiate the dialog.
Coordinates ?
<
10 Enter the target coordinate for the X axis.
<
5 Enter the target coordinate for the Y axis,
and go to the next question with ENT.
Radius comp. RL/RR/no comp. ?
<
Enter “No radius compensation” and go to the
next question with ENT.
Feed rate ? F=
<
100 Enter a feed rate of 100 mm/min for this path
contour; go to the next question with ENT.
Miscellaneous function M ?
<
3 Enter the miscellaneous function M3 “spindle
ON”; pressing the ENT key will terminate this
dialog.
The program blocks window will display the following line:
3 L X+10 Y+5 R0 F100 M3
Functions during the dialog Key
Ignore the dialog question
End the dialog immediately
Abort the dialog and erase the block
4.3 Cr
eating and
W
riting Pr
ogr
ams