Casio Naurtech CETerm Ver.5.5 User Manual - Manual (Page 37)

N AURTECH E MULATORS & W EB B ROWSER FOR W INDOWS CE / W INDOWS M OBILE
CETerm | CE3270 | CE5250 | CEVT220 Page 37
checkbox. You may have one or more host sessions configured for auto
connections.
Auto Reconnect: Checking this box will cause the emulator to attempt to
reconnect to the host if the connection is lost or closed by the host. This setting
has no affect on Web Browser sessions as Browser sessions are stateless and
establish a new connection for every data exchange.
Macro on Connect: Check this option if you want to automatically start playback
of a pre-recorded macro when the session connects. You may use this capability
for automatic login to a host application or automate any steps that require to be
performed upon session connection.
Confirm Disconnect: Check this option if you want to be prompted prior to
disconnecting a connected session. The prompt will force a user action before
proceeding ahead with disconnection of the host session.
Confirm Exit (Connected): Check this option if you want to be prompted prior to
exiting our application if one or more sessions are connected.
Exit on Disconnect: Check this option to exit the application when one or more
of the connected sessions disconnects. The disconnection may be triggered by
either the user or by the host.

Check Network on Connect: When enabled, the network signal presence and
availability will be automatically checked when an attempt is made to connect /
reconnect to the host. The user will be prompted if the device is out of RF range
or if the network cannot be detected.

Check Network on Resume: On certain devices, depending on your
configuration settings, the OS withdraws power from the WLAN card when the
device is suspended. This may be done to prolong battery life. When enabled,