Casio fx-CG Series Screen Receiver - Manual (Page 28)

E-27
Message Description Required Action
The image could not be sent
from the calculator.
(1) Try pressing a key on the
calculator.
(2) Check to make sure that
the calculator is in the
Screen Receiver Mode.
If the screen is not sent after
you perform the above steps,
disconnect the USB cable
and check the calculator
setup. Next, reconnect and
try again.
For details, select the
following on the menu bar:
Help - Manual, or refer to the
Screen Receiver user’s guide.
The calculator screen image
cannot be sent for some
reason. Follow the steps that are
shown on the display and try
again.
See “3. Using Screen
Receiver” for details.
The connection has been
broken for some reason and
is being restored.
If data communication does
not resume after some
time, perform the operation
described below.
Try pressing a key on the
calculator. If the screen is
not sent after you perform
the above steps, disconnect
the USB cable and check
the calculator setup. Next,
reconnect and try again.
For details, select the
following on the menu bar:
Help - Manual, or refer to the
Screen Receiver user’s guide.
—
Follow the steps that are
shown on the display and try
again.
The application is already
running.
Another user may already be
using the application. Another user is running
Screen Receiver. Wait until the other user shuts
down Screen Receiver.
* Mac OS: Macintosh