Epson AcuLaser C9300 - Manual (Page 97)

Invalid N/W Module
There is no network program, or the network program cannot be used with your printer. Contact a
qualified service representative.
Invalid PS3
There are errors in the ROM module. Turn off the printer and contact your dealer.
Invalid ROM A
The printer cannot read the installed optional ROM module. Turn off the printer, then remove the
ROM module.
Invalid Size Cassette1/Invalid Size Cassette2/Invalid Size Cassette3/Invalid Size Cassette4
The printer cannot detect the paper size. Adjust the paper guide on the paper tray correctly.
Jam Paper Size Error
The paper jam occurred because the loaded paper size is different from the specified paper size.
Remove the jammed paper. See “Clearing Jammed Paper” on page 147 for instructions on removing
the jammed paper.
Maintenance Unit Needed Soon
This message indicates that the maintenance unit is near the end of its service life. You can continue to
print until the Replace Maintenance Unit message appears.
To clear this warning message and continue printing, select Clear All Warnings from the control
panel’s Reset Menu. For instruction about accessing the control panel menus, see “How to access the
control panel menus” on page 60.
Manual Feed ssss
The manual feed mode is specified for the current print job. Make sure the paper size indicated by
ssss
is loaded, then press the Start/Stop button.
Memory Overflow
The printer has insufficient memory to execute the current task. Press the Start/Stop button on the
control panel to resume printing, or press the W Pause/Cancel button to cancel the print job.
Epson AcuLaser C9300 Series User's Guide
Using the Control Panel 97