MCZ Vivo 90 Pellet Comfort Air User Manual
Page 42
MAN
21:11
FR
19
SF
°C
MAN
21:11
FR
19
SF
°C
40
9-REMOTE CONTROL MAX
NO AIR FUNCTION (SF)
The NO AIR function allows the stove to operate at the minimum power throughout the night, with no room ventilation. This function is
only available in AUTO and MAN mode(not in TIMER mode). Proceed as follows to set it:
from the VENTILATION setting (by pressing key D), press key D again and you will access theSLEEP setting mode.
From when the dashes “--“ are displayed, press the lower key C and the NO AIR function is activated (SF appears); by confirming with D
or E one goes back to the basic display in which SF and the moon remain visible.
Once the function is activated, the flame power goes to 1 and the ventilation switches off after about 5 minutes.
When this function is active, nothing happens when the C keys are pressed. To disable the NO AIR function, access the SLEEP setting, press
upper key C to make the dashes “--“ appear and confirm with keys D or E.