RIGOL MSO/DS1000Z Series - Manual (Page 158)

RIGOL Chapter 7 Digital Channel
7-2 MSO1000Z/DS1000Z User’s Guide
To Select the Digital Channel
Press LA to open the logic analysis control menu. You can select any of the digital
channels or user-defined digital channel groups. Press Current to open the
channel/group dropdown menu and rotate the multifunction knob to select the
desire channel or channel group. You can also press Current or VERTICAL
POSITION continuously to switch among the options in order.
 D0-D15: select any channel of D0-D15. The channel label and waveform
corresponding to the channel selected are displayed in red.
 Group1-Group4: select any of the user-defined groups (Group1-Group4). The
channel labels and waveforms of all the channels of the channel group selected are
displayed in red.
 None: do not select any channel/group.
Note: Only digital channels or user-defined groups that are turned on can be
selected.
For how to turn on the digital channel/group, please refer to the introduction in "To
Turn on/off the Digital Channel".
For how to define channel group, please refer to the introduction in "Group Set".
To Turn on/off the Digital Channel
You can turn on or off the digital channels through the following two methods.
Method One:
Press D7-D0 to turn on or off channels D7-D0 at the same time.
Press D15-D8 to turn on or off channels D15-D8 at the same time.
Method Two:
Press ON/OFF to enter the digital channel/group "ON/OFF" setting menu.
 Press SelectCH to turn on channels D0-D15 selection list. Rotate
to select
any channel and press to turn on or off the channel. You can also press
SelectCH continuously to turn on or off the selected channel. Channels turned
on are marked with and channels that are not turned on are marked with .
You can turn on or off any channel via the channel selection menu.
 Press Group, rotate to select any channel group and press down to
turn on or off all the channels in the group at the same time. You can also press
Group continuously to turn on or off the selected group. The channel groups
turned on are marked with and the channel groups that are not turned on
are marked with .
Note:
― When you have turned off channels D7-D0 at the same time using D7-D0,
you can still turn on or off any of the channels via the channel selection