KEPCO KLN 750W Series, Firmware Version 1.60 to 1.6x - Manual (Page 79)

KLN 750W 032614
B-5
B.23 SOURce:MEMory:VOLTage:X COMMAND
SOUR:MEM:VOLT:X
Syntax: Short Form: SOUR:MEM:VOLT:X <NRf> Long Form: SOURce:MEMory:VOLTage:X <NRf>
Description: Sets the memory location defined by X to the voltage value <NRf>.
Argument: <NRf> is a value in the range from 0 to rated voltage of unit.
Example: SOURce:MEMory:VOLTage:5 62.4 sets memory location 5 to 62.4V.
B.24 SOURce:MEMory:VOLTage:X? QUERY
SOUR:MEM:VOLT:X?
Syntax: Short Form: SOUR:MEM:VOLT:X? Long Form: SOURce:MEMory:VOLTage:X?
Description: Returns voltage value stored in memory location X (in volts).
Return Format: <NRf>
Example:
SOURce:MEMory:VOLTage:5? returns 6.24000E+01 (Voltage stored in memory location 5 is
62.4V).
B.25 SOURce:VOLTage COMMAND
SOUR:VOLT
Syntax: Short Form: SOUR:VOLT <NRf> Long Form: SOURce:VOLTage <NRf>
Description: Sets the output voltage value. Maximum output voltage is 105% of rated voltage; minimum volt-
age is zero.
Argument: <NRf> is a value in the range from 0 to 105% of rated voltage of unit. Rated voltage and current
are defined by model (e.g., for KLN 6-100, rated voltage is 6V, rated current is 100A).
Example: SOURce:VOLTage 30 sets output voltage value to 30V.
B.26 SOURce:VOLTage? QUERY
SOUR:VOLT?
Syntax: Short Form: SOUR:VOLT? Long Form: SOURce:VOLTage?
Description: Indicates programmed output voltage (in volts).
Return Format: <NRf>
Example:
SOURce:VOLTage? returns 3.00000E+01 to indicate output voltage is programmed to 30V.
B.27 SOURce:VOLTage:LIMit:LOW COMMAND
SOUR:VOLT:LIM:LOW
Syntax: Short Form: SOUR:VOLT:LIM:LOW <NRf> { MIN | MAX }
Long Form: SOURce:VOLTage:LIMit:LOW <NRf> { MIN | MAX }
Argument: <NRf> is a value in the range from 0 to 95% of rated voltage of unit.
MIN is the minimum value for lower limit
MAX is the maximum value for lower limit
Description: Sets the lower limit of output voltage (in volts). The lower limit can be set to a maximum of
95% of rated voltage. Minimum value for lower limit is 0. *RST sets this value to 0.
Example: SOURce:VOLTage:LIMit:LOW 10 sets lower limit for output voltage to 10V. For a 40V model this
means that output voltage could not be programmed lower than 10V. SOURce:VOLT-
age:LIMit:LOW programs the lower limit for the 40V model 38V.
B.28 SOURce:VOLTage:LIMit:LOW? QUERY
SOUR:VOLT:LIM:LOW?
Syntax: Short Form: SOUR:VOLT:LIM:LOW? Long Form: SOURce:VOLTage:LIMit:LOW?
Description: Indicates programmed lower limit for output voltage (in volts).
Return Format: <NRf>
Example:
SOURce:VOLTage:LIMit:LOW? returns 1.00000E+01 to indicate lower limit for output voltage is
programmed to 10V.