Avago Technologies LSI SAS 3041E-R - Manual (Page 211)

Configuration Utility Menu Screens 10-9
Version 1.3 Copyright © 2001, 2002, 2007 by LSI Logic Corporation. All rights reserved.
10.3.5 Adapter Properties Menu
The Adapter Properties menu allows you to view and modify adapter
settings. It also gives you access to the adapter’s device settings.
Figure 10.4 shows the Adapter Properties menu.
Figure 10.4 Adapter Properties Menu
Table 10.5 describes the fields in the Adapter Properties menu. The
Adapter, PCI Bus, and Dev/Func fields at the top of the screen are the
same as defined for the Boot Adapter List menu (
Table 10.3 ).
Video Mode Specifies the default video mode for the CU. You can set the Video Mode to
either Color or Monochrome. The monochrome setting enhances readability on
a monochrome monitor.
Support Interrupt Allows the ability to stop the system from hanging on Int40.
<Restore Defaults> Press Enter when this option is selected to restore default settings for the
options listed on this menu.
Table 10.4 Global Properties Field Descriptions (Cont.)
Field Description
LSI Logic PCI Configuration Utility Version FC MPTBIOS-x.xx
Adapter Properties
Adapter PCI Dev/
Bus Func
LSIFC929 0 60
<Device Properties>
<Persistent IDs>
Controllers WWPort Name XXXXXXXXXXXXXXXX
Controllers WWNode Name XXXXXXXXXXXXXXXX
Removable Media Support [None]
Link Configuration [Auto]
Topology Configuration [Auto]
Multi-Pathing [No]
Persistent ID Type [WWN]
Table 10.5 Adapter Properties Field Descriptions
Field Description
<Device Properties> Press Enter to view and modify device properties.
<Persistent IDs> Press Enter to view the adapter’s Persistent ID menu.