Epson WorkForce WF-2930 Wireless All-in-One Color Inkjet Printer User Manual
Page 38
38
7.
Enter your wireless password.
Note:
The network name and password are case sensitive. Be sure to correctly enter uppercase and
lowercase letters, and numeric or special characters.
8.
Select
OK
when you finish entering your password.
9.
Do one of the following:
• If setup was successful, press the
OK
button to exit.
• If setup was unsuccessful, press the
start button to print a network setup report or press the
stop button to return to the previous menu. Repeat these steps to try again.
10. Press the
home button to exit, if necessary.
You see the
icon on the Wi-Fi Setup screen and should be able to connect to your product
directly from your computer or device, and then print. If you are printing from a computer, make sure
you installed the network software as described on the
Start Here
sheet.
Parent topic:
Wi-Fi Infrastructure Mode Setup
Related references
Status Icon Information
Entering Characters on the LCD Screen