RED DIGITAL CINEMA V-RAPTOR 8K VV DSMC3 Camera (RF, Black) - Manual (Page 121)

EDGECODE
Use Edgecode to assign an edge code to the media.
Use the keypad to enter a unique edge code number to the media.
Edge Code is a SMPTE Timecode track that by default starts at 01:00:00 on the first frame of each CFexpress media
card. It is a sequential code that is continuous from frame to frame and also between clips. Edge Code is equivalent to
RUN RECORD as used on broadcast cameras.
For more information, refer to Secure Format .
FORMAT
Use Format to execute a secure format of the media.
For more information, refer to Secure Format .
COPYRIGHT © 2021 RED.COM, LLC 955-0198, V1.1, REV. A | 114
V-RAPTOR™ 8K V V OPERATION GUIDE