Hisense HAIO163 163" Full HD HDR All-in-One LED Commercial Display - Manual (Page 22)

DATA Verify
PC TO
TV DD FF 00 06 A1 06 00 00 02 XX BB CC
TV T0
PC AB AB 00 06 A1 06 00 00 01 XX CD CD
PC TO
TV DD FF 00 06 A1 06 00 00 00 XX BB CC
TV T0
PC AB AB 00 06 A1 06 00 00 01 XX CD CD
PC TO
TV DD FF 00 06 A1 06 00 00 01 XX BB CC
TV T0
PC AB AB 00 06 A1 06 00 00 01 XX CD CD
DATA Verify
DD FF 00 06 A1 09 00 00 VV XX BB CC
AB AB 00 06 A1 09 00 00 01 XX CD CD
PC TO
TV DD FF 00 07 C1 31 00 00 00 01 XX BB CC
TV T0
PC AB AB 00 07 C1 31 00 00 01 00 XX CD CD
PC TO
TV DD FF 00 07 C1 31 00 00 01 01 XX BB CC
TV T0
PC AB AB 00 07 C1 31 00 00 01 01 XX CD CD
PC TO
TV DD FF 00 08 C1 1C 00 00
YY MM
DD XX BB CC
TV T0
PC AB AB 00 09 C1 1C 00 00
01 YY
MM XX CD CD
PC TO
TV DD FF 00 08 C1 1D 00 00
HH
MM SS XX BB CC
TV T0
PC AB AB 00 09 C1 1D 00 00
01 YY
MM XX CD CD
PC TO
TV DD FF 00 06 C1 1E 00 00 01 XX BB CC
TV T0
PC AB AB 00 06 C1 1B 00 00 01 XX CD CD
PC TO
TV DD FF 00 06 C1 1E 00 00 01 XX BB CC
TV T0
PC AB AB 00 09 C1 1B 00 00
01 YY
MM XX CD CD
Switch
on/off
Set Time
(H/M/S)
YY MM DD
HH MM SS
Computer
HDMI 1
HDMI 2
Screen on
Screen off
Length Command code
Volume
Control
Protocol tail
PC TO TV
TV T0 PC
Serial Protocol
Serial port status
The device can receive the serial port command sent by the external controller or OPS of the
device. Refer to the following table for the specific command protocol:
1. Baud rate: 115200 2. Control section: PC → The device 3. Response section: TV → PC
Protocol header Length Command code Protocol tail
Source
Reboot
Screen
Software
Version
Query
• Verify is the exclusive OR of Length, Command code, ID and Data.
• All data are hexadecimal values.
• For all commands received by the device, the protocol header needs to be changed to AB AB and the protocol
tail needs to be changed to CD CD when returning to the PC.
Protocol header
17
LED All-In-One User Manual