NEC 40,000-Lumen 4K Laser Installation Projector - Manual (Page 113)

96
5. Using On-Screen Menu
[3D SETTINGS(2)]
3D DETAIL SETTINGS
Turning on this item enables the detailed settings of 3D so that you can set each item for 3D. Set [3D DETAIL SETTING]
to meet your 3D image system requirements. If you do this incorrectly, your 3D image will not be displayed correctly.
To project 3D images using a frame sequential signal, turn on [3D DETAIL SETTINGS] and set each item.
L/R DISPLAY REF.
Select when displaying a 3D image using L/R timing (left eye/right eye) of a 3D signal from the DISPLAY REFER-
ENCE terminal.
DELAY
Adjust delay values (time or phase) of output reference.
TIME ...................... -32768 to 36767 μs
PHASE ................... -180 to 180 deg
FRAME RATE RATIO
Select a frame rate ratio of 3D.
INPUT FRAME DOMINANCE
Select the order of L/R (left eye/right eye) of an input image.
L/R OUTPUT REF. POLARITY
Select the polarity of 3D output image information (left eye/right eye).
DARK TIME
Specify a time between 0 and 65535μs.
L/R INPUT REF.
Select when displaying a 3D image using L/R timing (left eye/right eye) of a 3D signal from the INPUT REFERENCE
terminal.