NEC 40,000-Lumen 4K Laser Installation Projector - Manual (Page 144)

127
5. Using On-Screen Menu
NETWORK SERVICE
If [PASSCODE] has been set, you cannot display the [NETWORK SERVICE] screen without entering PASSCODE.
SERVICE
HTTP SERVER Configure the settings for connecting to the HTTP server.
ON ......................... Connect directly to the HTTP server without displaying
the login screen.
OFF ........................ It is not possible to connect to the HTTP server.
AUTH. .................... Display the login screen when connecting to the HTTP
server.
Enter the USER NAME and PASSWORD that have been set at [AC-
COUNT].
-
PJLink Configure the settings for using PJLink.
To use this function, connect the LAN cable to the HDBaseT port.
PASSWORD ........... Set the password.
CLASS ................... To use functions with PJLink Class 2 specifications,
set [CLASS 2].
DESTINATION ........ When the CLASS is set to “CLASS 2”, input the IP
address of the destination.
NOTE:
• Do not forget your password. However, if you forget your password, consult
with your distributor.
• What is PJLink?
PJLink is a standardization of protocol used for controlling projectors of
different manufacturers. This standard protocol is established by Japan
Business Machine and Information System Industries Association (JBMIA)
in 2005.
The projector supports all the commands of PJLink Class 1.
• Setting of PJLink will not be affected even when [RESET] is done from the
menu.
Up to 32 alphanumeric
characters