Native Instruments KOMPLETE KONTROL S88 MK2 88-Key Controller for KOMPLETE - Manual (Page 39)

Option Description
Invert toggle switch Some continuous pedals internally support the inverted pedal
range but cannot be configured on the pedal directly. The
Invert Range function allows you to invert the range of the
pedal connected to the keyboard.
Swap T/R toggle switch Allows you to use pedals with inverted tip/ring connectivity.
Recalibrate button Allows you to recalibrate the input.
When using the MIDI Assignment editor, all keyboard controls (i.e. navigation, transport, etc.) are
blocked.
4.5 Connecting External MIDI Equipment to the Keyboard
The KOMPLETE KONTROL keyboard has dedicated MIDI sockets that allow you to directly
connect other MIDI devices using a 5-pin DIN MIDI cable and integrate the keyboard into your
MIDI setup.
The MIDI sockets on the rear panel of the KOMPLETE KONTROL keyboard.
To connect your external MIDI equipment:
1.
Connect the device receiving MIDI signals to the MIDI OUT socket on the rear panel of
the keyboard using a 5-pin DIN MIDI cable.
2. Connect the device sending MIDI signals to the MIDI IN socket on the rear panel of the
keyboard using a 5-pin DIN MIDI cable.
→ The MIDI equipment is connected.
Depending on your use case, additional configuration is required in the software:
Setting up KOMPLETE KONTROL
Connecting External MIDI Equipment to the Keyboard
KOMPLETE KONTROL S-Series - Manual - 39