Honeywell HRXD9 - Manual (Page 119)

Operation
Document 900.0856 Rev 3.00 119
11/07
Note When naming a file, you cannot use the following characters: \, /,
:, *, ?, ", <, >, |.
11. Highlight Include Text-In Data and press . This will toggle between On and
Off. When this feature is On, you can include text-in data when copying video if the
recorded video has text-in data.
12. Highlight Verify After Burning and press . This will toggle between On and
Off. When this feature is on, you can verify that the data is written on the CD-RW or
DVD-RW properly.
13. Once you have given the video clip a file name, highlight Start and press . The
confirmation screen displaying data size will appear. When the storage device
does not have enough space, the DVR will ask if you want to copy as much of the
video clip as possible in the available space. Highlight Continue and press
to
continue clip copy.
14. Once the clip copy starts, you can cancel it by selecting Cancel or hide the
screen by selecting Close. When selecting Close, Clip Copy continues and a
confirmation screen will display when it is complete.
Note Only 4.7GB DVD media is available. To clip copy video on the
DVD media using remaining space, the size of previously
recorded data on the DVD media should be less than 4GB.
Note The file size for clip copy is limited to 2GB.
15. You can use other functions on the DVR while video is being backed up. To do
this, highlight Close and press . You can return to the Clip-Copy screen at any
time to check the progress.
Refer to Appendix C, Reviewing Video Clips for instructions on how to review
video clips you have copied.
Note During Clip Copy, you cannot shut the system down, clear data
on the storage device, or format the storage device.