Honeywell HRXD9 - Manual (Page 22)

Installation
22
Figure 2-1 16-Channel DVR Rear Panel
Your DVR can be used with either NTSC or PAL equipment.
Note You cannot mix NTSC and PAL equipment. For example, you
cannot use a PAL camera and an NTSC monitor.
Connecting the Video Input
Figure 2-2 Video Input Connectors
Connect the coaxial cables from the video sources to the BNC Video In connectors.
Connecting the Loop-Through Video
Figure 2-3 Video Loop-Through Connectors
Ethernet Port USB Port
Alarm Reset In
SCSI Port
Alarm Inputs
Audio In/Out Power Connector
Alarm Outs Factory Reset Switch
RS232 Port
VGA Port
Video In RS485
Spot Out SVHS Out
Video Out