HP Vectra VE 5/series 2 - Manual (Page 8)

3 Position the PC so that its rear connectors are easily accessible.
4 Place the display next to the computer.
Installation Tools
No tools are required to install your PC. However, if you plan to install a disk drive or an
accessory board inside your PC, you will need a flat-blade screwdriver. See chapter 3,
How to
Install Accessories Inside Your PC , for more information on installing accessories.
WARNING: If you are in any doubt that you can lift the PC
and the display safely, do not try to move them
without help.
CONNECTING THE DISPLAY, MOUSE, AND KEYBOARD
1 Connect the display, mouse, and keyboard to the back of the computer. The connectors
are shaped to go in one way only.
2 Tighten the display cable attachment screws.