HP Vectra VE 5/series 2 - Manual (Page 9)

Mouse Connector
Keyboard Connector
Display Connector
CONNECTING TO A NETWORK
The LAN Adapter installed in your PC may have two RJ-45 connectors (one for 100-Mbit/s
operation and one for 10-Mbit/s operation) or one RJ-45 connector (supporting both 100-Mbit/s
and 10-Mbit/s).
The LAN Adapter can automatically detect which connector or network type is being used.
1 Connect the RJ-45 plug on your network cable to the 100-Mbit/s or 10-Mbit/s LAN
connector on the LAN Adapter as appropriate for your network type. Push the plug into the
connector until the plug clicks into place.
100-Mbit/s
10 Mbit/s
Connect the
network cable to
the 100-Mbit/s or
10-Mbit/s LAN
connector
(Your LAN
adapter may
have one
connector which
supports both
network types.)
2 Attach the other end of the LAN cable to a hub (or into a wall jack that is connected to a
hub).