Heatiator Heatilator Fireplace IDV4833IT - Manual (Page 49)

Heatilator • ICON DV-IDV Series • 4042-575 • Rev. S • 5/11 49
K. Decorative Firescreen, Refractory Shields
and Lower Decorative Front Face
• Install the decorative fi rescreen by fi rst inserting the left
side of the screen rod into the horseshoe-shaped cradle
(see Figure 15.11)
• Rotate the right side of the rod up and into the cradle on
the right (see Figure 15.12).
Note: Make sure the outside screen eyelets are placed
behind the left and right screen rod supports to ensure
the screen is locked closed. See Figure 15.13.
Figure 15.11 Place Left End of Screen Rod
Figure 15.12 Place Right End of Screen Rod
Eyelet
Rod Support
Figure 15.13 Ensure Eyelets are Outside the Rod Support
Figure 15.14 Place Center of Screen Rod
Figure 15.15 Install Refractory Shields
Figure 15.16 Install Lower Decorative Front Face
• Place the center of the screen rod into the center screen
rod support (see Figure 15.14).
• Install the left and right refractory shields using the three
screws (see Figure 15.15).
• Install lower decorative front face (see Figure 15.16).