Faria Instruments NMEA2000 - Manual (Page 12)

Page 9
Press and hold “Up” and “Down” for 2 seconds to reset
“Fuel Used” to zero (0).
Automatically resets fuel used to zero and returns to “Local
Fuel Config” menu.
Press “Up” or “Down” to select another function or “Mode”
to return to “Edit” mode.
Set “Fuel Tank Full”
1 Set
Fuel Tank
Full
2
3
NOTE: In order to use the “Fuel Left” function, the owner
must set this function when the fuel tank is filled or use the
set current amount of fuel below. In addition, if “Set Fuel
Tank Full” function is used, the “Fuel Tank Size” must be
set correctly to the size of the fuel tank in this application.
The computer will monitor fuel usage and calculate the fuel
left in the tank. This function does not replace the fuel level
function provided by the fuel sender and should be used with
caution.
Press and hold “Up” and “Down” for 2 seconds to set “Fuel
Tank Full.”
Automatically sets the fuel available to the tank size selected
by the user and returns to “Local Fuel Config” menu.
Press “Up” or “Down” to select another function or “Mode”
to return to “Edit” mode.
Set “Amount of Fuel”
1 Set
Amount
of Fuel
2
3
NOTE: If a known amount of fuel is in the fuel tank but it
is not full, this function can be used to indicate the amount
of fuel available. The “Fuel Left” function will then use the
amount of fuel entered to calculate the “Fuel Left.”
Press and hold “Up” and “Down” for 2 seconds to select
“Set Amount of Fuel.”
Press “Up” or “Down” to select another function or “Mode”
to return to “Edit” mode.
Press “Up” or “Down” to set the amount of fuel known to be
in the fuel tank. Adjust until the displayed volume matches
the known amount of fuel in the tank.
1 Fuel
Amount
XXX
2
3