Faria Instruments NMEA2000 - Manual (Page 19)

Page 16
Press and hold “Up” and “Down” for 2 seconds to select
“Voltmeter Dial.”
Press “Up” or “Down” to select another “Gauge Range.”
Press “Mode” to return to “Edit” mode.
Press “Up” or “Down” to scroll through the selections.
When the correct choice is next to the selection arrow,
Press and hold “Up” and “Down” for 2 seconds to save the
selection and return to “Gauge Range” selection.
1 Select
Voltmeter
Dial
32 v
> 16 v
2
3
4
5
Select “Water Pressure Dial”
1 Select
Water Press
Dial
2
3
Press and hold “Up” and “Down” for 2 seconds to select
“Water Pressure Dial.”
Press “Up” or “Down” to select another “Gauge Range.”
Press “Mode” to return to “Edit” mode.
Press “Up” or “Down” to scroll through the selections.
When the correct choice is next to the selection arrow,
Press and hold “Up” and “Down” for 2 seconds to save the
selection and return to “Gauge Range” selection.
1 Select
Water Press
Dial
60 psi
> 45 psi
2
3
4
5
Select “Boost Pressure Dial”
1 Select
Boost Press
Dial
2
3
Press and hold “Up” and “Down” for 2 seconds to select
“Boost Pressure Dial”
Press “Up” or “Down” to select another “Gauge Range”
Press “Mode” to return to “Edit” mode.
Press “Up” or “Down” to scroll through the selections. Only
three selections will show at one time.
When the correct choice is next to the selection arrow,
Press and hold “Up” and “Down” for 2 seconds to save the
selection and return to “Gauge Range” selection
1
Select
Boost Press
Dial
20 PSI
> 30 PSI
50 PSI
70 PSI
2
3
4
5
6
7
Press “Up” or “Down” to select another “Gauge Range.”
Press “Mode” to return to “Edit” mode.
Press “Up” or “Down” to select another function or “Mode”
to return to “Normal” mode.