Faria Instruments NMEA2000 User Manual
Page 23
Press “Up” or “Down” to scroll through the selections.
When the correct choice is next to the selection arrow,
Press and hold “Up” and “Down” for 2 seconds to save the
selection and return to the “Select Data Sources” menu.
1
Water
Pressure
Source
> NMEA2K
Local
2
3
4
5
6
Press “Up” or “Down” to select another function or “Mode”
to return to the “Edit” mode.
Calibrate “Trim Sender”
1
Calibrate
Trim
Sender
2
3
Press and hold “Up” and “Down” for 2 seconds to select
“Calibrate Trim Sender.”
Adjust engines to the full up position. Press the “Up” button
to save settings.
1
Set Trim
UP
Press UP
TRIM
2
3
4
5
Adjust engines to the full down position. Press the “Down”
button to save settings.
1
Set Trim
DOWN
Press DOWN
TRIM
2
3
4
5
Press and hold “Up” and “Down” for 2 seconds to save the
calibration values, and return to the “Edit” mode.
Repeat as necessary.
Press “Up” or “Down” to select another function or “Mode”
to return to “Normal” mode.
Select Display Units
1
Select
Display
Units
2
3
Press and hold “Up” and “Down” for 2 seconds to select
“Display Units.”
Press “Up” or “Down” to select another function.
Select “Pressure Units”
1
Select
Pressure
Units
2
3
Press and hold “Up” and “Down” for 2 seconds to select
“Pressure Units”
Press “Up” or “Down” to select another choice of “Units”