Faria Instruments NMEA2000 - Manual (Page 6)

Page 3
With the display in “Positive” mode, black
on white, pressing the “Down” button
decreases the contrast. Pressing the
“Up” button increases contrast.
Continuing to press the “Up” button
causes the display to reverse to the
“Negative” mode, white on black. The
contrast in this mode is controlled the
same way as the “Positive” mode.
To return to “Positive” mode, continue to
press the “Down” button until the display
reverses.
To adjust the lighting intensity of all of
the instruments in the system, press and
hold both the “Down” and “Up” buttons
for 2 seconds. The lighting intensity may
now be adjusted by using the “Down” or
“Up” buttons.
Return to the “Normal” mode by pressing
and holding both the “Down” and “Up”
buttons for 2 seconds.
Displayed Functions
Tachometer
The tachometer is a digital instrument
with the appearance of an analog
instrument. The tachometer receives
data directly from the ECU so no settings
are required.
A microprocessor controlled stepper
motor moves the pointer to display
engine revolutions per minute.
Default Screen “1”
Engine Temp
41˚21N 072˚06W
Faria
KLine
mini
Gateway
PGFXXX
7.3
GPH
3650
RPM
65˚
F
93.5
Miles
19.3
PSI
136
˚F
Engine Hours
325
Hours
Depth
20
Feet
Trip
20.1
PSI
Oil Pressure
On Off
Trim Sync
P S
Engine Temp
Displays the coolant / cylinder head
temperature received from the ECU.
Dial range can be selected in the “Edit”
function.
Engine Hours
Displays the Engine Hours data received
from the engine ECU.
Depth
Displays the depth sunder data (if
installed and on the engine bus) received
from the engine.