Siemens Gigaset SL565 - Manual (Page 62)

61
Notes on the operating instructions
Gigaset SL565 / GBR PTT / A31008-M1715-L111-2-7619 / appendix.fm / 11.7.07
Example: multiple line input
There are many situations in which you
can change the settings of a display or
enter data in several lines.
In this user guide symbols are used to
guide you step by step through multiple
line input. This is illustrated below using
the example of "Setting the date and
time". The things you have to do are
explained in the boxes.
You will see the following display (exam-
ple):
PC Interface
You can connect your handset to your
computer using the data cable (page 63).
Your handset can communicate with a
computer via a program (free download at
www.siemens.com/gigasetSL565).
You can access your handset's directory
and load sounds (.mid) and screensaver
pictures (.bmp) onto the handset from
your computer.
During the transfer of data between hand-
set and PC, you will see Data Transfer on
the display. During this time, it is not pos-
sible to use the keypad and incoming calls
will be ignored.
Writing and editing a
text message
The following rules apply when writing a
text message:
u Control the cursor with u v t
s.
u Characters are added to the left of the
cursor.
u Press the star key * to show the
table of special characters.
u The first letter of the name of directory
entries is automatically capitalised, fol-
lowed by lower case letters.
You can call up the table of special charac-
ters when writing an SMS using the *
key. Select the required character and
insert it with §Insert§ .
Date:
Enter day, month and year in 8-digit
format.
The second line is marked with [ ] to
show it is active.
¤
Enter the date using the digit keys.
Time:
Enter hours/minutes in 4-digit format.
¤
Press the s key.
The fourth line is marked with [ ] to show
it is active.
¤
Enter the date using the digit keys.
¤
Save changes.
¤
Press the §Save§ display key.
¤
Then press and hold the a key.
The handset changes to idle status.
Date/Time
Date:
[15.11.2005]
Time:
11:11
Ý
Save
Please note:
If the handset is in Bluetooth mode (page 51),
any connection via the data cable that is
already connected will be interrupted. Blue-
tooth must be deactivated in order for you to
be able to use a connected data cable.