Lexicon Universal Disc Player RT-20 - Manual (Page 18)

Getting Started Lexicon
1-4
DO NOT expose the RT-20 to sudden or drastic temperature
changes, as this might cause condensation to form on the RT-20
lens. Although condensation will not damage the RT-20, it might
temporarily impair performance. If this occurs, allow at least 1 hour
for condensation to evaporate before attempting to load a disc.
DO NOT obstruct the front panel display remote control sensor.
Unless the RT-20 is using the IR IN connector, the remote control
must be in line-of-sight with the front panel display remote control
sensor. See “OPERATION CONSIDERATIONS” on page 2-13 for
more information.
DVD-V REGIONS
The map shown below indicates DVD-V region codes for all areas of
the world. All DVD-Vs are marked with a region code, which is
often located on the disc packaging. The RT-20 rear panel is also
marked with a region code. The RT-20 is compatible with discs
marked with this same region code or with the ALL region code.
The RT-20 is not compatible with discs marked with other region
codes.
DISC COMPATIBILITY
The RT-20 is compatible with disc formats that meet the require-
ments listed in the tables that begin on the next page. Refer to
“DISC CARE & HANDLING” on page 1-8, “DISCS TO AVOID” on
page 1-8 and “NAVIGATING DISC MENUS” on page 4-2 for more
information.
Note:
The RT-20 is not compatible with DVD-ROM, DVD-RAM, or
CD-ROM (except those that include compatible MP3 tracks).