Lexicon Universal Disc Player RT-20 - Manual (Page 84)

Setup Lexicon
3-40
To select a Video Adjust bank:
1. Press the remote control VIDEO ADJ. button.
2. When the Video Adjust bar opens, press the remote control
and buttons to highlight the Video Memory Select option.
Then, press the ENTER button to select this option.
3. When the Video Memory Select bar opens as shown above, use
the and buttons to highlight the desired Video Adjust-
ment bank.
When a bank is highlighted, its settings are automatically
applied to the picture on the display device screen, allowing for
previewing of bank settings. The settings you select are saved
when a new bank is selected or the Video Memory Select bar is
closed.
Note:
Depending on the loaded disc and the associated display device, pre-
viewed Video Adjust bank settings may still be applied when a new
bank is highlighted. If this occurs, select a new Video Adjust bank to
cancel the preview. The selected bank settings will be automatically
applied to the picture on the display device screen.
4. When the desired Video Adjustment bank is highlighted, press
the ENTER button to select this bank. Its settings will be auto-
matically applied to the picture on the display device screen.
5. To close the Video Adjustment menu screen, press the ENTER
or VIDEO ADJ. button.