4 outside enclosure overview, Figure 1 ac4 enclosure—external features, Figure 2 ac4 enclosure—internal features – Liebert AC4 User Manual
Page 8: Outside enclosure overview, Ac4 enclosure—external features, Figure 2, Ac4 enclosure—internal features
Introduction
2
1.4
Outside Enclosure Overview
The AC4’s controller board comes in an enclosure that is 2-3/4" deep and has a built-in liquid crystal
display (LCD) and a key lock, as shown in Figure 1. The enclosure is made of metal to accommodate
secure conduit fittings and protect components against environmental debris.
Figure 1
AC4 enclosure—external features
The enclosure must be secured to a wall, either flush-mounted or recessed in the wall, as described in
2.0 - Installation. Knockouts and access slots on the top and bottom allow easy connection of wires
and cables (see 3.0 - Wiring and Connections) with either mounting type.
Figure 2
AC4 enclosure—internal features
LCD for configuration
and operation
Key lock
The enclosure
has knockouts
and access slots
on top and
bottom for
cables and wires.
Back of LCD
Controller Board
Ground wire
for LCD
Knockouts and
access slots
(top and bottom)