Lucent Technologies Guestworks SErver 1079984G3 - Manual (Page 35)

Issue 1 April 1997 29
Feature Descriptions
Administration 0
In addition to the following, see the information about administering Recorded
Announcement equipment on Page 109 and printing reports on Page 113.
change system-parameters guestworks-bcs-options
■ Enter a y in the Dual Wakeup and Room Activated Wakeup with
Tones fields. These options default to y, and can be changed only by
Lucent Technologies personnel.
NOTE:
If Wakeup Activation via Tones is enabled, the speech synthe-
sizer circuit pack (TN725B) is disabled from service. This means
that guests cannot enter their own Do Not Disturb requests.
change feature-access-codes
■ Use this form to add the Automatic Wakeup feature access code.
change system-parameters hospitality
■ On Page 2 of this form, enter the time of day when you want to print the
wakeup activity report in the
Time of Scheduled Wakeup Activity
Report field. This report is printed on the Journal/Schedule printer and
summarizes the wakeup activity for each extension that had wakeup
activity for the past 24 hours.
■ On Page 2 of this form, enter the time of day when you want to print the
wakeup summary report in the
Time of Scheduled Wakeup Sum-
mary Report field. This report is printed on the Journal/Schedule
printer and gives an hour-by-hour summary of the number of scheduled
wakeup calls and a list of extensions to which wakeup calls were
attempted but did not complete during the hour.