Lucent Technologies Guestworks SErver 1079984G3 - Manual (Page 99)

Issue 1 April 1997 93
Feature Descriptions
Administration 0
change system-parameters hospitality
■ On Page 1 of this form, enter y in the Forward PMS Message to
Intuity Lodging field and transparent in the PMS Protocol Mode
field.
change communication-interface processor-channels
■ On Page 4 of this form, administer processor interface channel 59 to the
audix application with the
Machine-ID field equal to 1.
Required Hardware 0
There is no special hardware required for this feature. However, if you upgrade
your existing GuestWorks
server with this new feature, you must disconnect the
voice messaging link between the Lucent INTUITY and the PMS.
Required Software 0
To take advantage of this new feature, the PMS software may need to be
upgraded to be compatible. Contact your PMS vendor and request that they ver-
ify that their software complies with the
DEFINITY Enterprise Communications
Server (ECS), GuestWorks server, and System 75 PBX Property Management
System Interface Specifications, (555-231-601).
The Lucent INTUITY software must be at least Issue 1.1 and the GuestWorks
server must be at least Issue 2.0.