Polycom IP 601 - Manual (Page 10)

Polycom IP 600/601 User Guide
VoicePipe Communications IP 600/601 User Guide Page 10 of 13
Using the Feature
1. GO OFF HOOK .
2.
Press
*70 . You will hear a stutter dial tone then a normal dial tone.
3.
Dial the
NUMBER of the party you wish to call.
Caller ID Blocking Per Call
Allow users to block their caller ID on a call-by-call basis.
Using the Feature
1. GO OFF HOOK .
2.
Press
*67 . You will hear a stutter dial tone then a normal dial tone.
3.
Dial the
NUMBER of the party you wish to call.
Caller ID Delivery Per Call
Allow users to deliver their caller ID on a call-by-call basis when they have turned on the Caller ID Blocking feature
within the VoicePipe Web Portal.
Using the Feature
4. GO OFF HOOK .
5.
Press
*65 . You will hear a stutter dial tone then a normal dial tone.
6.
Dial the
NUMBER of the party you wish to call.
Dialing
Allow a user to make a call.
Using the Feature
Placing a Call
1.
Pick up
HANDSET , press the NEWCALL soft key, or press the SPEAKERPHONE KEY .
2.
Enter the number you wish to call.
3.
Press the
SEND soft key, or wait to connect.
Extended Functionality
Placing a Call
1.
Dial the
NUMBER you wish to call using the KEYPAD .
2.
Press the
DIAL soft key.
Do Not Disturb
Allow users to set their station as unavailable so that incoming calls are given a busy treatment. Depending on how
the user has set up their busy treatment, the callers will be directed to voicemail or forwarded to another line.
NOTE: The user must use the same method to turn the function off that they used to turn the function on.
Otherwise, the system will not recognize the ‘off’ command.